Parquet laminate is one of the popular tools for covering the floor. which can be used in office, commercial or residential units. These floorings can be used in different places due to their high variety. And due to the presence of a resistant laminate layer on them, it can be said that it is a suitable option for high-traffic areas that you can use.

Obtaining the floor area of ​​a unit is not a difficult task, but we must do it carefully so that there is enough material purchased. We recommend that you buy an extra amount of the desired parquet.

Laminate parquet measurement method

In order to get the area of ​​different parts such as rooms and reception, you must write down their length and width accurately and finally add them all together. It is better to start with a piece of paper and draw a simple map of the desired unit on it. Then measure all the walls using the meter and write it down on the paper.

After getting the area of ​​each room, add all the areas together. To get the area of ​​a unit whose length is 10 meters and its width is 5 meters, it is enough to multiply the length by the width, and we get the number 50. The number 50 is the reception area to get the total area of ​​the unit. You should measure each part of a unit in the same way and finally add all the numbers together.

Calculation of the number of laminate parquet

Using the above method to measure parquet laminate, first we need to get the full floor area, then according to the brand of parquet laminate purchased, we need to calculate the required amount of it. Parquet laminates are usually supplied in the form of cartons, each carton of these products has a certain amount that is specified. For example, Isofam laminate parquet contains 1.96 square meters of laminate in each carton. Now suppose that the sum of the areas obtained for your unit is 80 meters. To get the required number of cartons of Isofam laminate, it is enough to divide this amount by the total area.

80 ÷ 1.96 = 40.81